加勒比中文字幕亚洲伦理 国产原创日韩无码 中文字幕无码乱在线 操bb国片四区三区

Wuxi Gotele Metal Products Co., Ltd : CN EN
Home >>News >>News of Metal Industry

Basics about Steel



Since the Industrial Revolution in the 19th century, Steel has played a primary role in economic development. The metal is still widely used today for many purposes thanks to its characteristics. Steel is actually not a pure metal, but an alloy of iron and variable percentages of carbon. Different contents of carbon divide the metal into ‘grades’. These, in turn, have specific features and are suitable for different purposes. Depending on its composition, steel can be categorised into: carbon steel, alloy steel, stainless steel and tool steel.


Yet, steel is highly affected by corrosion and requires protection. A common practice is that called Galvanisation, which consists in adding a coat of zinc on the metal to cover sides and edges of the steel shape. Hot-dip galvanisation is the most used system where steel is immersed into melted zinc and then let dry. The zinc layer is also called ‘sacrificial’ as it defends the metal substrate by rusting before the inner steel is reached. Usually, the thickness of the coating determines the item’s lifespan.


Beyond being protected, the metal has to be shaped in order to be used. Perhaps, the two most common practices are Hot and Cold Rolling. Generally, the Rolling technique is the process of reducing the thickness or changing the cross-sectional area of a work piece by compressive forces.


The Hot Rolling process consists in pressing heated steel billets among rolls, which squeeze it until the desired shape is reached. The number and layout of the pressing rolls depends on the shape that has to be imprinted. The product is then cooled down. Hot rolled steel is relatively cheap, easy and fast to produce. However, the shaped metal decreases in size when cooling, thus causing measurements imperfections. Besides, the rough finish may not be aesthetically pleasant and paint is hard to apply on it.


Instead, Cold Rolling presses steel at room temperature, avoiding the problem of downsizing. This phase is actually a further processing of hot-rolling. Because cold steel is less ductile, cold rolling requires several pressing phases. An incredible amount of stress has to be employed for shaping the metal. Precisely, as much stress needed until steel reaches its point of plastic deformation. There, the metal ends up being stronger than hot rolled alternatives. Yet, cold rolled steel may not allow for the same range of shapes that hot rolled steel offers. Advantages of cold steel are its dimension accuracy and its smooth finish, although it is twice more expensive than hot rolled steel.


Since its establishment in 1980, Shanghai Metal Corporation has specialised in both hot and cold rolled steel products. With over 35 years of experience, we can proudly supply you with items such as Hot Rolled Steel Coil/Sheet/Strip, Steel Chequered Plate - Diamond Plate and Copolymer Coated Steel Tape. For further information and a full list of products,

HomeTelProductsContact
CN EN
凉城县| 黄冈市| 昌图县| 嵊泗县| 即墨市| 武汉市| 蓬溪县| 房产| 伊金霍洛旗| 临武县| 灌阳县| 徐闻县| 桂林市| 珠海市| 盐源县| 张家界市| 华阴市| 湘潭市| 诸城市| 磴口县| 大方县| 泸溪县| 讷河市| 祁连县| 寻乌县| 呼图壁县| 临清市| 连山| 安远县| 洱源县| 丹阳市| 甘肃省| 诸暨市| 得荣县| 阜新市| 尉氏县| 紫云| 德兴市| 白水县| 巴林右旗| 濮阳市|